Maxus Benchtop Blast Cabinet MXS3000 Instructions d'exploitation

Naviguer en ligne ou télécharger Instructions d'exploitation pour Aspirateurs Maxus Benchtop Blast Cabinet MXS3000. Maxus Benchtop Blast Cabinet MXS3000 Operating instructions Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
2. Safety glasses and a
NIOSH/MSHA
approved respirator
must be worn
during operation
and clean up.
3. During operation,
do not expose the
hands or skin
directly in the line
of the blast nozzle.
4. After assembly,
inspect to make sure all
components seal properly.
5. Do not exceed the maximum
operating pressure of the blasting
equipment (125 PSI).
Disconnect the
cabinet from the
air supply before changing accessories
or attempting to install, service,
relocate or perform any maintenance.
6. Check hoses and air lines for weak
or worn condition before each use.
Make sure all connections are
secure before use.
Do not point the
abrasive blaster
gun at anyone or objects other than
the intended work object.
!
WARNING
!
WARNING
General Safety
Information
CALIFORNIA PROPOSITION 65
You can create dust
when you sweep, blast, cut, sand, drill
or grind materials such as
wood, paint, metal,
concrete, cement, or other
masonry. This dust often
contains chemicals known
to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
This product or its
power cord contains chemicals known
to the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands after
handling.
SILICA ABRASIVE HAZARD
Breathing dust
from abrasives
containing silica can be dangerous.
Exposure can cause SILICOSIS, lung
disease, or other respiratory problems,
Wear NIOSH/MSHA approved respirator
at all times when performing abrasive
blasting and while cleaning up.
Do not misuse this
product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness,
tingling or pain occur, and consult a
physician.
1. Read this instruction manual before
connecting this device to the
compressor.
!
WARNING
!
DANGER
!
DANGER
!
DANGER
Benchtop Blast Cabinet
Operating Instructions MXS3000
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Maxus Benchtop Blast Cabinet is
designed for cleaning and removing
rust, scale, and paint. It is the ideal
method for stripping, polishing and
etching projects.
Safety Guidelines
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking, carefully inspect for
any damage that may have occurred
during transit. Check for loose, missing
or damaged parts.
NOTICE
!
CAUTION
!
WARNING
!
DANGER
© 2005 IN709900AV 10/05
For parts, product & service information
visit www.maxustools.com
Figure 1
See Warranty on page 8 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Figure 2 - Do not spray acids or
caustics
Notes
Manuel de Instrucciones
MXS3000
Vue de la page 0
1 2 3 4 5 6 7 8 9 10

Résumé du contenu

Page 1 - Benchtop Blast Cabinet

2. Safety glasses and aNIOSH/MSHAapproved respiratormust be wornduring operationand clean up.3. During operation,do not expose thehands or skindirectl

Page 2 - Common abrasive media guide

11NOTE: Les médias abrasifs qui n’ont pas été nettoyés et tamisés pourraient contenir un matériau qui bloquera la buse du pistolet et celadoit être é

Page 3 - Common abrasive

Notes19Manuel de InstruccionesMXS30002Abrasive BlastingMediaBlasting media comes in many differentgrit sizes and sometimes is also rated asextra fine,

Page 4 - Usos Sugeridos

MXS3000Manuel de Instrucciones3Beach sand (play sand) is a commonand inexpensive blast media. Thishighly aggressive media can havedebris mixed in whic

Page 5 - Suggested Uses

17NOTA: El abrasivo que no ha sido limpiado y tamizado puede contener material que obturará la boquilla de la pistola y no debería usarse.Use baja pr

Page 6 - Materiales abrasivos

16Presión baja o no hay presión enla herramientaEl material abrasivo no sale de lapistolaLa pistola no cesa de rociar -gatillo atascadoChisporreo - si

Page 7 - Cabine de Décapage de Table

15esquirlas o moledura. El óxido dealuminio y el carburo silíceo puedenpresentarse en diferentes colores. Hoy seconsiguen con facilidad mezclas devidr

Page 8 - Cabina de Chorreado de Mesa

1410. Póngase un respirador homologadopor NIOSH/MSHA. 11. Coloque el material abrasivo en lacabina. 12. Coloque la pieza que desea limpiardentro de la

Page 9 - Médias abrasifs

1. Lea este manual deinstrucciones antesde conectar estedispositivo alcompresor.2. Durante el uso y lalimpieza, esindispensable ponersegafas de seguri

Page 10 - Suggestions d’utilisations

MXS3000Instructions d’Utilisation9Médias abrasifs - nonrecommandésBien que certains médias soientdisponibles, ils ne sont pas recommandésà cause des d

Commentaires sur ces manuels

Pas de commentaire